I have not said that I should always do my printing wherever else, at the moment I cannot afford a reasonable printer because my current priority is more in photographic equipment.
If the printing service has CM in place and they provide icc profiles then youāre good.
Still you will need to learn the characteristics of papers and this cost time and money.
Iāve also had exhibitions with my photos. One example (donāt mind the quality, theyāre not as bad as they look on these photos, Iāve documented the exhibition with my smartphone) :
@s7habo Ok, to clarify. Both Eizo and Nec display can be Calibrated and Profiled under Linux with dedicated Vendor Software (Color Navigator 7 for Eizo for free, Nec SpectraViewII - need a license, Nec). They are Hardware calibrated. I did it both. Nec for me works better. Far more engineer friendly Color Navigator is nice looking and has less options They are fast and easy to use.
The software calibration (as does diplaycal) is possible with almost every monitor, as it only changes the image before it reaches monitor. (limiting thus the color āresolutionā [8bpc possible values] to only those which are displayable)
The hw calibration actually changes also the monitor internal LUT and requires usually the manufacturer tool for the calibration. The tool can have list of specific calibration devices which it supports.
@Entropy512
Itās windows drivers limitation afaik. They already had support for 10bit via directx full-screen (games) longer, but not via opengl, what pro apps are usually using.
I saw article where amd engineer confirmed that despite the consumer card is giving 10bit output, the actual surfaces are 8bit.
It would be in the price range, overs hardware calibration and Linux software support. Interestingly the list of supported calibration devices is smaller on Linux than on Windows. But why the X-Rite i1 Display should work and the X-Rite i1Studio not?
A couple of decades(?) ago, I owned a NEC monitor and printer. Both were well built and are still in working condition. I still use the monitor sometimes. As for the printer, the cartridges are rare and expensive and OSes havenāt supported it for a long time.
Yes. Iāve bought Eizo CG279X ColorEdge. I have found a Christmas offer for about 1700 ā¬ and immediately took it without further thought. I have reached my ultimate limit financially now and will be hungry in January but it was still a relief after so much headache during the research.
Anyway, many thanks to all of you who made the effort to show me the right way with your advice!
Now I have to deal with all the settings and see if I can get software running on Ubuntu.
I got the installer for Linux version from support, but I cannot install it. The page says it is for Red Hat Enterprise Linux 7 (64-bit). But I use Ubuntu 18.04. Is there any way to ātranslateā it on Ubuntu Linux?
Iām a complete idiot when it comes to that sort of thing.
It is a tar.gz. There is an install.sh script and what is does it simply adds additional libraries (hopefully they are available on Ubuntu) and copies files to /opt/EIZO.
Iām not quite sure if I did not install it on my 18.04. I had CN6 installed (it was a pain in a back and I ended up installing it on VM).
If in doubt. Do as I did for CN6:
Install Centos in VirtualBox (also install additions ans extensions)
Install CN7 in that Centos
Connect Monitor via USB cable to your computer and pass through USB device to VM
3.1 There maybe some issue with usb visibility for VBox. Google it since I donāt recall exact issue I just remember it exists (sorry)
Pass through colorimeter (spectrometer) the same way (you have i1display pro?)
Setup share folder with your host machine so that you can copy ICC files.
This will work since CN will communicate with Monitor via USB and it will send commands to Monitor directly via USB. Thus during calibration all graphical stack is by-passed.
You will need to manually track you ICC files and synchronize them. On the other hand I ended up with ā¦ one ICC file.
I think I may try to install CN7 in the near future if ā¦ I have a time.
Good luck
Anyway great choice! It costs around 2.500 Euro in Poland (it hurtsā¦) Hope you will be happy with it!
i1 Display Pro is a colorimeter and i1Studio is a spectrometer.
Professional animations are done on Linux systems so there is a need to necessary SW to calibrate display.
There is no professional color critical printing solution for Linux. Neither Epson nor Canon provides drives for Linux thus there is no necessity for calibration/profiling SW.
Thatās my guess. Simply there is no business for it.