current master + exiv2 0.27.4 + preliminary Canon CR3 support
darktable-3.7.0+1309~g1811266d5.dmg
for a list of changes see Pulse · darktable-org/darktable · GitHub
build requires at least osx 10.15; don’t forget to backup …
current master + exiv2 0.27.4 + preliminary Canon CR3 support
darktable-3.7.0+1359~gf9ac9fdfa.dmg
for a list of changes see Pulse · darktable-org/darktable · GitHub
build requires at least osx 10.15; don’t forget to backup …
1 Like
Thanks for providing these updates. Unfortunately, recent builds no longer work properly on Monterey (12 12.0 Beta (21A5543b))–the program launches but with a blank window. While Monterey is still not a released version of Mac OS, I thought I should mention it. The official release (3.6) works fine.
Best.
latest builds were made with XCode13 and sdk 11.3. the official builds are using an older XCode and sdk for compatibility
[quote=“MStraeten, post:353, topic:13213, full:true”]
current master + exiv2 0.27.4 + preliminary Canon CR3 support
darktable-3.7.0+1446~g4ba7083fd.dmg
for a list of changes see Pulse · darktable-org/darktable · GitHub
build requires at least osx 10.15; don’t forget to backup …
1 Like
All working as expected. A minor observation in the last two builds the logo does not look OK, could be my iMac settings.
Thank you for the weekly builds
seems to be related to the display resolution…
current master + exiv2 0.27.4 + preliminary Canon CR3 support
darktable-3.7.0+1476~gcafd1e1bb.dmg
for a list of changes see Pulse · darktable-org/darktable · GitHub
(heif support is disabled since build code is broken for osx)
build requires at least osx 10.15; don’t forget to backup …
I just updated to Monterey - darktable GUI is just plain black.
Seems to be specific to these builds since 3.6.1 release is fine.
so wait with Monterey update if you need the cr3 build 
That’s the issue I mentioned approximately two weeks ago.
rebuild whole macports environment with xcode 13 and sdk 12 doesn’t help
current master + exiv2 0.27.4 + preliminary Canon CR3 support
darktable-3.7.0+1503~g722974e2c.dmg
for a list of changes see Pulse · darktable-org/darktable · GitHub
(heif support is disabled since build code is broken for osx)
build was made using Xcode commandlinetools 12 and sdk 10.15, so it will run also on macos12.
requires at least osx 10.15; don’t forget to backup …
Thanks! This does indeed now work on Monterey.
The problem with the logo is gone. And this one is excellent!!!
current master + exiv2 0.27.4 + preliminary Canon CR3 support
darktable-3.7.0+1541~g803c78133.dmg
for a list of changes see Pulse · darktable-org/darktable · GitHub
(heif support is disabled since build code is broken for osx)
build was made using Xcode commandlinetools 12 and sdk 10.15, so it will run also on macos12.
requires at least osx 10.15; don’t forget to backup …
This new version again the same logo problem described earlier.
https://discuss.pixls.us/t/current-osx-build/13213/357?u=rajkhand
I have noticed that again this version is noticeably slower than the earlier version! Specially the diffuse and sharpen and colorbalance rgb
Thats no new „feature“, that depends on your display configuration. Gtk and osx aren’t best friends. Performance might be affected too since monterey has an issue with gtk if built with sdk11 or later so this build is done with xcode 12.0 and sdk 10.15.
I am not on Monterey and I am comparing it with 3.7.0+1476, for 3.7.0+1541 version for each small operation in the above two modules there is a noticeable delay and the “working” notice will be displayed
Following your comments, I did a quick comparison between 1476 vs 1541 on my iMac. I use a Nikon .nef file that I have as a test image with a fix development .xmp file. For getting the results I start dt from terminal with darktable -d perf, and I export the test file to the desktop as a .jpg. These is what I got:
dt 1476 cpu 34.594 sec
dt 1541 cpu 36.293 sec
dt 1476 cpu+gpu 11.168 sec
dt 1541 cpu+gpu 11.252 sec
The GPU makes a big difference, however to fully enable the gpu it is very important, at least in my system OSX 11.5.1, to run the script proposed by MStraeten earlier in this thread, after each update.
Hope this may help you!
The results in detail for the timing of the different modules:
Only cpu
CPU + GPU
current master + exiv2 0.27.4 + preliminary Canon CR3 support
(probably my last build with rawspeed cr3 patch since cr3 support via libraw is on the home stretch)
darktable-3.7.0+1629~g24d9fcb8f.dmg
for a list of changes see Pulse · darktable-org/darktable · GitHub
(heif support is disabled since build code is broken for osx)
build was made using Xcode commandlinetools 12 and sdk 10.15, so it will run also on macos12.
requires at least osx 10.15; don’t forget to backup …