This will be a useful tool and avoid me going into another app to do the local adjustment (which will involve a chunk of learning curve). A few comments though… It would be nice to be able to rotate the area like Graduated Filter. Also, with Local Lab switched on, I loaded the .pp3 profile for an old version of this photo, i.e. made with a previous version of RT. RT left the Local Lab on. I suppose ideally RT should detect that the pp3 pre-dates the new tool, and therefore ensure it is off? But thanks again for this nice new tool.
I wanted to liven up the strip between the railings, the buildings etc, and so I wanted it to act all the way across, at least all the way on the left side. Unless I missed something, I could only drag the marker to the boundary of the photo, and then with the “feathering” / gradient at the edge, it left a good chunk unaffected by the local lab settings. It would be nice if local lab could go right to the edge. One possible way to do this would be to add a function which allowed a strip of image to be added to one or more sides, after de-mosaicing. Then the markers (or selection tools, whatever) could go beyond the edge of the photo, and all the tools would hopefully work fine, being none the wiser. Andrew.
Great. Thanks!
Now that I’ve downloaded the zip file, what do I do next? How do I compile for Linux Mint 18 (Ubuntu 16.04)?
Thanks in advance…
EDIT… Just checked the redme file, with a link to Rawpedia. Looks way to complicated for this fella. I think I’ll just wait for the final release. Thanks for the idea though.
No, it is not. Just follow the instructions.
Since you want to build the Local lab branch, there is
just one very small change in the instructions… I’ll start
a Linux machine in a few minutes’ time to check the
very small change needed & I’ll be back here with the info.
Just checking, is this the same git pacakaging that appears in darius’s highly explosive ppa? and if not, by installing from git, will this have any effect on the git package already installed from the above ppa?
Now, Darius fetches the code from the same source as you will do, that is true. But does he use the Local Lab branch? I doubt it, I presume that he offers the gtk3 branch.
If you follow the instructions that I gave you this morning, your RT will be the Local Lab branch, and your RT will be placed in folder ~/rt.
Darius’ RT most probably will be placed in one of the bin folders in your computer, meaning that they both (i.e. yours and his) can coexist in a friendly manner – you simply decide which one you would like to start from time to time.
I cannot see that this will be a drawback, but if you have several RTs on your computer, they will all share the same config file (located in your home folder).
If anything should go wrong, just delete them and reinstall the version you would like to keep
fotonut@fotonut02 ~ $ git clone https://github.com/Beep6581/RawTherapee ~/repo-rt
Cloning into '/home/fotonut/repo-rt'...
remote: Counting objects: 38573, done.
remote: Compressing objects: 100% (86/86), done.
remote: Total 38573 (delta 47), reused 0 (delta 0), pack-reused 38487
Receiving objects: 100% (38573/38573), 96.13 MiB | 3.65 MiB/s, done.
Resolving deltas: 100% (31230/31230), done.
Checking connectivity... done.
fotonut@fotonut02 ~ $ cd ~/repo-rt
fotonut@fotonut02 ~/repo-rt $ git checkout locallab
Branch locallab set up to track remote branch locallab from origin.
Switched to a new branch 'locallab'
fotonut@fotonut02 ~/repo-rt $ grep -c processor /proc/cpuinfo
4
fotonut@fotonut02 ~/repo-rt $ rm -rf build; make clean; ./clean
cat clean.sh >clean
chmod a+x clean
rm: cannot remove 'install_manifest.txt': No such file or directory
rm: cannot remove './CMakeFiles': No such file or directory
rm: cannot remove './rtengine/CMakeFiles': No such file or directory
rm: cannot remove './rtexif/CMakeFiles': No such file or directory
rm: cannot remove './rtgui/CMakeFiles': No such file or directory
rm: cannot remove './rtdata/CMakeFiles': No such file or directory
rm: cannot remove './cmake': Is a directory
rm: cannot remove './rtengine/cmake*': No such file or directory
rm: cannot remove './rtexif/cmake*': No such file or directory
rm: cannot remove './rtgui/cmake*': No such file or directory
rm: cannot remove './rtdata/cmake*': No such file or directory
rm: cannot remove './Makefile': No such file or directory
rm: cannot remove './rtengine/Makefile': No such file or directory
rm: cannot remove './rtexif/Makefile': No such file or directory
rm: cannot remove './rtgui/Makefile': No such file or directory
rm: cannot remove './rtdata/Makefile': No such file or directory
rm: cannot remove './rtengine/librtengine.so': No such file or directory
rm: cannot remove './rtengine/librtengine.a': No such file or directory
rm: cannot remove './rtgui/rawtherapee': No such file or directory
rm: cannot remove './rtexif/librtexif.so': No such file or directory
rm: cannot remove './rtexif/librtexif.a': No such file or directory
fotonut@fotonut02 ~/repo-rt $ mkdir build && cd build
fotonut@fotonut02 ~/repo-rt/build $ cmake -DCMAKE_CXX_FLAGS="-std=c++11 -Wno-deprecated-declarations -Wno-unused-result" \
> -DWITH_LTO="OFF" \
> -DCMAKE_BUILD_TYPE="release" \
> -DPROC_TARGET_NUMBER="2" \
> -DBUILD_BUNDLE="ON" \
> -DBINDIR="." \
> -DDATADIR="." \
> -DCACHE_NAME_SUFFIX="4" ..
-- The C compiler identification is GNU 5.3.1
-- The CXX compiler identification is GNU 5.3.1
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- CMAKE_BUILD_TYPE: release
-- Found PkgConfig: /usr/bin/pkg-config (found version "0.29.1")
-- Checking for module 'gtk+-2.0>=2.12'
--
CMake Error at /usr/share/cmake-3.5/Modules/FindPkgConfig.cmake:367 (message):
A required package was not found
Call Stack (most recent call first):
/usr/share/cmake-3.5/Modules/FindPkgConfig.cmake:532 (_pkg_check_modules_internal)
CMakeLists.txt:222 (pkg_check_modules)
-- Configuring incomplete, errors occurred!
See also "/home/fotonut/repo-rt/build/CMakeFiles/CMakeOutput.log".
fotonut@fotonut02 ~/repo-rt/build $ make -j4 install
make: *** No rule to make target 'install'. Stop.
fotonut@fotonut02 ~/repo-rt/build $ mv release ~/rt
mv: cannot stat 'release': No such file or directory
fotonut@fotonut02 ~/repo-rt/build $
Well done! There are just some minor things that we have to straighten out…
All those “cannot remove” are quite normal for the first run.
In order not to fill the forum with a discussion that is not of general interest, I suggest we move to the email section of pixls.us.
You will find my suggestions on how to go on in your mail box within short…
Any time I click to load a profile, the dialog window to select a PP3 shows small. I resize it to make it bigger but then later on RT shows it small again. Is there a way to make RT “remember” the dialog window size?
On attached photo I need to enhance sea, without touching the woman.
I have applied local lab on the left sea zone, but I need to work also on the sea area included inside the arm and in the right area.
My question is if is possible to apply 3 local labs, like in Lightroom, where is possible to apply many retouching brushes as is needed.
Thanks in advance
Davide
For now only one Local Lab control is possible at a time, but @jdc is currently working on the possibility to add several controls.
In the meantime, if you don’t need to do it on many photos, you can process your image 3 times, the first time from raw to TIFF, and then times from the TIFF you just processed.
