Wacom Intuos S Bluetooth & Mint 18.3


#1

Hi, I have Linux Mint 18.3 Cinnamon and a Wacom Intuos S Bluetooth (newest model). The tourble is, that the graphics tablet does not work with bluetooth, although it shows up as connected to the computer. It only works if it is connected with the usb cable.
Can anybody help?
Thanks in advance
b


(Mica) #2

Are you able to get through the bluetooth pairing process?


#3

yes. As I said, the device shows up as connected. It just does not do anything after that. I think it is recognized as a device but not as a specific device. It does not appear under “wacom tablet”.


(Mica) #4

What does dmesg say about it?


#5
> [    0.063183] DMAR: RMRR base: 0x0000008d800000 end: 0x0000008fffffff
> [    0.063184] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
> [    0.063185] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
> [    0.063186] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
> [    0.063187] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
> [    0.063188] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
> [    0.063188] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
> [    0.064642] DMAR-IR: Enabled IRQ remapping in xapic mode
> [    0.064643] x2apic: IRQ remapping doesn't support X2APIC mode
> [    0.068798] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [    0.108500] TSC deadline timer enabled
> [    0.108504] smpboot: CPU0: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (family: 0x6, model: 0x4e, stepping: 0x3)
> [    0.108556] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
> [    0.108589] ... version:                4
> [    0.108590] ... bit width:              48
> [    0.108590] ... generic registers:      4
> [    0.108591] ... value mask:             0000ffffffffffff
> [    0.108592] ... max period:             00007fffffffffff
> [    0.108592] ... fixed-purpose events:   3
> [    0.108592] ... event mask:             000000070000000f
> [    0.109487] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
> [    0.109499] smp: Bringing up secondary CPUs ...
> [    0.109563] x86: Booting SMP configuration:
> [    0.109564] .... node  #0, CPUs:      #1 #2 #3
> [    0.111391] smp: Brought up 1 node, 4 CPUs
> [    0.111393] smpboot: Total of 4 processors activated (19200.00 BogoMIPS)
> [    0.115965] devtmpfs: initialized
> [    0.116021] x86/mm: Memory block size: 128MB
> [    0.118400] evm: security.selinux
> [    0.118400] evm: security.SMACK64
> [    0.118401] evm: security.SMACK64EXEC
> [    0.118401] evm: security.SMACK64TRANSMUTE
> [    0.118402] evm: security.SMACK64MMAP
> [    0.118402] evm: security.ima
> [    0.118403] evm: security.capability
> [    0.118465] PM: Registering ACPI NVS region [mem 0x7459f000-0x7459ffff] (4096 bytes)
> [    0.118465] PM: Registering ACPI NVS region [mem 0x8bbae000-0x8ce7dfff] (19726336 bytes)
> [    0.118767] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
> [    0.118775] futex hash table entries: 1024 (order: 4, 65536 bytes)
> [    0.118814] pinctrl core: initialized pinctrl subsystem
> [    0.118984] RTC time: 16:32:45, date: 05/05/18
> [    0.119068] NET: Registered protocol family 16
> [    0.131672] cpuidle: using governor ladder
> [    0.147697] cpuidle: using governor menu
> [    0.147703] PCCT header not found.
> [    0.147812] Simple Boot Flag at 0x44 set to 0x1
> [    0.147829] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
> [    0.147830] ACPI: bus type PCI registered
> [    0.147831] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [    0.147893] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> [    0.147926] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
> [    0.147930] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
> [    0.148226] PCI: Using configuration type 1 for base access
> [    0.163894] HugeTLB registered 1 GB page size, pre-allocated 0 pages
> [    0.163895] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [    0.164157] ACPI: Added _OSI(Module Device)
> [    0.164157] ACPI: Added _OSI(Processor Device)
> [    0.164158] ACPI: Added _OSI(3.0 _SCP Extensions)
> [    0.164159] ACPI: Added _OSI(Processor Aggregator Device)
> [    0.165657] ACPI: Executed 21 blocks of module-level executable AML code
> [    0.171463] ACPI Error: No handler for Region [RAM_] (ffff9d2fa60e91f8) [EmbeddedControl] (20160930/evregion-166)
> [    0.171469] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160930/exfldio-299)
> [    0.171473] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._REG] (Node ffff9d2fa60e8cf8), AE_NOT_EXIST (20160930/psparse-543)
> [    0.171599] ACPI Error: No handler for Region [RAM_] (ffff9d2fa60e91f8) [EmbeddedControl] (20160930/evregion-166)
> [    0.171602] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160930/exfldio-299)
> [    0.171605] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC0._REG] (Node ffff9d2fa60e8cf8), AE_NOT_EXIST (20160930/psparse-543)
> [    0.173185] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
> [    0.178823] ACPI: Dynamic OEM Table Load:
> [    0.178886] ACPI: SSDT 0xFFFF9D2FA4FBB000 00061E (v02 PmRef  Cpu0Ist  00003000 INTL 20160108)
> [    0.179113] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
> [    0.180708] ACPI: Dynamic OEM Table Load:
> [    0.180718] ACPI: SSDT 0xFFFF9D2FA4A1AC00 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20160108)
> [    0.181563] ACPI: Dynamic OEM Table Load:
> [    0.181573] ACPI: SSDT 0xFFFF9D2FA4FB9000 0005AA (v02 PmRef  ApIst    00003000 INTL 20160108)
> [    0.182124] ACPI: Dynamic OEM Table Load:
> [    0.182133] ACPI: SSDT 0xFFFF9D2FA48C1400 000119 (v02 PmRef  ApCst    00003000 INTL 20160108)
> [    0.184471] ACPI : EC: EC started
> [    0.184471] ACPI : EC: interrupt blocked
> [    0.195295] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
> [    0.195296] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
> [    0.195298] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
> [    0.195298] ACPI: Interpreter enabled
> [    0.195351] ACPI: (supports S0 S3 S4 S5)
> [    0.195352] ACPI: Using IOAPIC for interrupt routing
> [    0.195397] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [    0.218365] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
> [    0.218376] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
> [    0.218410] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
> [    0.220370] PCI host bridge to bus 0000:00
> [    0.220372] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
> [    0.220373] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
> [    0.220374] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
> [    0.220376] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
> [    0.220376] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
> [    0.220377] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
> [    0.220378] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
> [    0.220379] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
> [    0.220380] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
> [    0.220381] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
> [    0.220382] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
> [    0.220383] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
> [    0.220384] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
> [    0.220386] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
> [    0.220387] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
> [    0.220388] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
> [    0.220389] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
> [    0.220390] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
> [    0.220392] pci_bus 0000:00: root bus resource [bus 00-fe]
> [    0.220400] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
> [    0.221424] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
> [    0.221434] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb0ffffff 64bit]
> [    0.221440] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
> [    0.221445] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
> [    0.222309] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
> [    0.222330] pci 0000:00:14.0: reg 0x10: [mem 0xb1300000-0xb130ffff 64bit]
> [    0.222407] pci 0000:00:14.0: PME# supported from D3hot D3cold
> [    0.223241] pci 0000:00:14.0: System wakeup disabled by ACPI
> [    0.223282] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
> [    0.223302] pci 0000:00:14.2: reg 0x10: [mem 0xb132a000-0xb132afff 64bit]
> [    0.224243] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
> [    0.224451] pci 0000:00:15.0: reg 0x10: [mem 0xb132b000-0xb132bfff 64bit]
> [    0.226090] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
> [    0.226299] pci 0000:00:15.1: reg 0x10: [mem 0xb132c000-0xb132cfff 64bit]
> [    0.227879] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
> [    0.227902] pci 0000:00:16.0: reg 0x10: [mem 0xb132d000-0xb132dfff 64bit]
> [    0.227984] pci 0000:00:16.0: PME# supported from D3hot
> [    0.228800] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
> [    0.228817] pci 0000:00:17.0: reg 0x10: [mem 0xb1328000-0xb1329fff]
> [    0.228825] pci 0000:00:17.0: reg 0x14: [mem 0xb1330000-0xb13300ff]
> [    0.228833] pci 0000:00:17.0: reg 0x18: [io  0x4080-0x4087]
> [    0.228841] pci 0000:00:17.0: reg 0x1c: [io  0x4088-0x408b]
> [    0.228850] pci 0000:00:17.0: reg 0x20: [io  0x4060-0x407f]
> [    0.228858] pci 0000:00:17.0: reg 0x24: [mem 0xb132e000-0xb132e7ff]
> [    0.228906] pci 0000:00:17.0: PME# supported from D3hot
> [    0.229723] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
> [    0.229799] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [    0.230597] pci 0000:00:1c.0: System wakeup disabled by ACPI
> [    0.230644] pci 0000:00:1c.4: [8086:9d14] type 01 class 0x060400
> [    0.230714] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
> [    0.231509] pci 0000:00:1c.4: System wakeup disabled by ACPI
> [    0.231545] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
> [    0.231615] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
> [    0.232418] pci 0000:00:1c.5: System wakeup disabled by ACPI
> [    0.232468] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
> [    0.233373] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
> [    0.233386] pci 0000:00:1f.2: reg 0x10: [mem 0xb1324000-0xb1327fff]
> [    0.234242] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
> [    0.234268] pci 0000:00:1f.3: reg 0x10: [mem 0xb1320000-0xb1323fff 64bit]
> [    0.234304] pci 0000:00:1f.3: reg 0x20: [mem 0xb1310000-0xb131ffff 64bit]
> [    0.234360] pci 0000:00:1f.3: PME# supported from D3hot D3cold
> [    0.235168] pci 0000:00:1f.3: System wakeup disabled by ACPI
> [    0.235208] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
> [    0.235255] pci 0000:00:1f.4: reg 0x10: [mem 0xb132f000-0xb132f0ff 64bit]
> [    0.235324] pci 0000:00:1f.4: reg 0x20: [io  0x4040-0x405f]
> [    0.236243] pci 0000:00:1c.0: PCI bridge to [bus 01]
> [    0.236311] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
> [    0.236331] pci 0000:02:00.0: reg 0x10: [io  0x3000-0x30ff]
> [    0.236360] pci 0000:02:00.0: reg 0x18: [mem 0xb1204000-0xb1204fff 64bit]
> [    0.236378] pci 0000:02:00.0: reg 0x20: [mem 0xb1200000-0xb1203fff 64bit]
> [    0.236477] pci 0000:02:00.0: supports D1 D2
> [    0.236478] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [    0.236539] pci 0000:02:00.0: System wakeup disabled by ACPI
> [    0.247844] pci 0000:00:1c.4: PCI bridge to [bus 02]
> [    0.247847] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
> [    0.247850] pci 0000:00:1c.4:   bridge window [mem 0xb1200000-0xb12fffff]
> [    0.248007] pci 0000:03:00.0: [168c:003e] type 00 class 0x028000
> [    0.248129] pci 0000:03:00.0: reg 0x10: [mem 0xb1000000-0xb11fffff 64bit]
> [    0.248833] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
> [    0.249079] pci 0000:03:00.0: System wakeup disabled by ACPI
> [    0.259947] pci 0000:00:1c.5: PCI bridge to [bus 03]
> [    0.259951] pci 0000:00:1c.5:   bridge window [mem 0xb1000000-0xb11fffff]
> [    0.261606] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
> [    0.261658] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
> [    0.261708] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
> [    0.261756] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
> [    0.261804] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
> [    0.261853] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
> [    0.261902] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
> [    0.261951] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
> [    0.262226] platform MSFT0101:00: failed to claim resource 1
> [    0.262230] acpi MSFT0101:00: platform device creation failed: -16
> [    0.262379] ACPI: Enabled 4 GPEs in block 00 to 7F
> [    0.262427] ACPI : EC: interrupt unblocked
> [    0.262441] ACPI : EC: event unblocked
> [    0.262453] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x50, EC_CMD/EC_SC=0x66, EC_DATA=0x62
> [    0.262454] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
> [    0.262719] SCSI subsystem initialized
> [    0.262757] libata version 3.00 loaded.
> [    0.262790] pci 0000:00:02.0: vgaarb: setting as boot VGA device
> [    0.262792] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
> [    0.262795] pci 0000:00:02.0: vgaarb: bridge control possible
> [    0.262795] vgaarb: loaded
> [    0.262813] ACPI: bus type USB registered
> [    0.262829] usbcore: registered new interface driver usbfs
> [    0.262837] usbcore: registered new interface driver hub
> [    0.262851] usbcore: registered new device driver usb
> [    0.262925] Registered efivars operations
> [    0.331169] PCI: Using ACPI for IRQ routing
> [    0.359177] PCI: pci_cache_line_size set to 64 bytes
> [    0.359371] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
> [    0.359372] e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
> [    0.359372] e820: reserve RAM buffer [mem 0x73412018-0x73ffffff]
> [    0.359373] e820: reserve RAM buffer [mem 0x7459f000-0x77ffffff]
> [    0.359374] e820: reserve RAM buffer [mem 0x74659000-0x77ffffff]
> [    0.359375] e820: reserve RAM buffer [mem 0x74f62018-0x77ffffff]
> [    0.359376] e820: reserve RAM buffer [mem 0x8b16e000-0x8bffffff]
> [    0.359377] e820: reserve RAM buffer [mem 0x8ceff000-0x8fffffff]
> [    0.359378] e820: reserve RAM buffer [mem 0x26f000000-0x26fffffff]
> [    0.359471] NetLabel: Initializing
> [    0.359472] NetLabel:  domain hash size = 128
> [    0.359472] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
> [    0.359486] NetLabel:  unlabeled traffic allowed by default
> [    0.359603] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
> [    0.359608] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
> [    0.361652] clocksource: Switched to clocksource hpet
> [    0.368777] VFS: Disk quotas dquot_6.6.0
> [    0.368795] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [    0.368882] AppArmor: AppArmor Filesystem Enabled
> [    0.368917] pnp: PnP ACPI init
> [    0.369097] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
> [    0.369099] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
> [    0.369100] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
> [    0.369101] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
> [    0.369103] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
> [    0.369104] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
> [    0.369105] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
> [    0.369108] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.369438] system 00:01: [io  0x2000-0x20fe] has been reserved
> [    0.369440] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.369590] system 00:02: [io  0xffff] has been reserved
> [    0.369592] system 00:02: [io  0xffff] has been reserved
> [    0.369593] system 00:02: [io  0xffff] has been reserved
> [    0.369595] system 00:02: [io  0x1800-0x18fe] has been reserved
> [    0.369597] system 00:02: [mem 0xfe800000-0xfe80ffff] has been reserved
> [    0.369598] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.369724] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
> [    0.369763] system 00:04: [io  0x1854-0x1857] has been reserved
> [    0.369765] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
> [    0.369835] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
> [    0.371165] system 00:06: [mem 0xfdaf0000-0xfdafffff] has been reserved
> [    0.371166] system 00:06: [mem 0xfdae0000-0xfdaeffff] has been reserved
> [    0.371167] system 00:06: [mem 0xfdac0000-0xfdacffff] has been reserved
> [    0.371169] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.371745] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
> [    0.371747] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
> [    0.371748] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
> [    0.371749] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
> [    0.371750] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
> [    0.371752] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
> [    0.371753] system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved
> [    0.371754] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved
> [    0.371756] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
> [    0.371757] system 00:07: [mem 0x90000000-0x9001ffff] has been reserved
> [    0.371759] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
> [    0.372241] pnp: PnP ACPI: found 8 devices
> [    0.379276] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
> [    0.379288] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
> [    0.379291] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
> [    0.379292] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
> [    0.379308] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
> [    0.379310] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
> [    0.379311] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
> [    0.379312] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
> [    0.379314] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
> [    0.379315] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
> [    0.379323] pci 0000:00:1c.0: BAR 14: assigned [mem 0x90100000-0x902fffff]
> [    0.379334] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90300000-0x904fffff 64bit pref]
> [    0.379337] pci 0000:00:1c.0: BAR 13: assigned [io  0x5000-0x5fff]
> [    0.379339] pci 0000:00:1c.0: PCI bridge to [bus 01]
> [    0.379341] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
> [    0.379345] pci 0000:00:1c.0:   bridge window [mem 0x90100000-0x902fffff]
> [    0.379348] pci 0000:00:1c.0:   bridge window [mem 0x90300000-0x904fffff 64bit pref]
> [    0.379353] pci 0000:00:1c.4: PCI bridge to [bus 02]
> [    0.379355] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
> [    0.379359] pci 0000:00:1c.4:   bridge window [mem 0xb1200000-0xb12fffff]
> [    0.379365] pci 0000:00:1c.5: PCI bridge to [bus 03]
> [    0.379369] pci 0000:00:1c.5:   bridge window [mem 0xb1000000-0xb11fffff]
> [    0.379376] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
> [    0.379377] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
> [    0.379378] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
> [    0.379379] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
> [    0.379380] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
> [    0.379381] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
> [    0.379382] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
> [    0.379383] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
> [    0.379384] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
> [    0.379385] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
> [    0.379386] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
> [    0.379387] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
> [    0.379388] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
> [    0.379389] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
> [    0.379390] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
> [    0.379391] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
> [    0.379392] pci_bus 0000:00: resource 20 [mem 0x90000000-0xdfffffff window]
> [    0.379393] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window]
> [    0.379394] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
> [    0.379395] pci_bus 0000:01: resource 1 [mem 0x90100000-0x902fffff]
> [    0.379396] pci_bus 0000:01: resource 2 [mem 0x90300000-0x904fffff 64bit pref]
> [    0.379397] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
> [    0.379398] pci_bus 0000:02: resource 1 [mem 0xb1200000-0xb12fffff]
> [    0.379399] pci_bus 0000:03: resource 1 [mem 0xb1000000-0xb11fffff]
> [    0.379537] NET: Registered protocol family 2
> [    0.379696] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
> [    0.379813] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [    0.379915] TCP: Hash tables configured (established 65536 bind 65536)
> [    0.379936] UDP hash table entries: 4096 (order: 5, 131072 bytes)
> [    0.379957] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
> [    0.380001] NET: Registered protocol family 1
> [    0.380014] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
> [    0.381780] PCI: CLS 64 bytes, default 64
> [    0.381819] Unpacking initramfs...
> [    1.141546] Freeing initrd memory: 43384K
> [    1.141572] DMAR: ACPI device "device:6e" under DMAR at fed91000 as 00:15.0
> [    1.141575] DMAR: ACPI device "device:6f" under DMAR at fed91000 as 00:15.1
> [    1.141587] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [    1.141589] software IO TLB [mem 0x86c7f000-0x8ac7f000] (64MB) mapped at [ffff9d2dc6c7f000-ffff9d2dcac7efff]
> [    1.141776] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22983777dd9, max_idle_ns: 440795300422 ns
> [    1.141859] Scanning for low memory corruption every 60 seconds
> [    1.142163] audit: initializing netlink subsys (disabled)
> [    1.142203] audit: type=2000 audit(1525537966.128:1): initialized
> [    1.142637] Initialise system trusted keyrings
> [    1.142734] workingset: timestamp_bits=36 max_order=21 bucket_order=0
> [    1.144184] zbud: loaded
> [    1.144630] squashfs: version 4.0 (2009/01/31) Phillip Lougher
> [    1.144847] fuse init (API version 7.26)
> [    1.147199] Key type asymmetric registered
> [    1.147200] Asymmetric key parser 'x509' registered
> [    1.147239] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
> [    1.147276] io scheduler noop registered
> [    1.147277] io scheduler deadline registered
> [    1.147284] io scheduler cfq registered (default)
> [    1.147942] efifb: probing for efifb
> [    1.147961] efifb: framebuffer at 0xa0000000, using 8100k, total 8100k
> [    1.147962] efifb: mode is 1920x1080x32, linelength=7680, pages=1
> [    1.147963] efifb: scrolling: redraw
> [    1.147964] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
> [    1.148079] Console: switching to colour frame buffer device 240x67
> [    1.148103] fb0: EFI VGA frame buffer device
> [    1.148109] intel_idle: MWAIT substates: 0x11142120
> [    1.148110] intel_idle: v0.4.1 model 0x4E
> [    1.148357] intel_idle: lapic_timer_reliable_states 0xffffffff
> [    1.148441] ACPI: AC Adapter [ADP1] (on-line)
> [    1.148542] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
> [    1.148561] ACPI: Lid Switch [LID0]
> [    1.148592] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
> [    1.148594] ACPI: Sleep Button [SLPB]
> [    1.148625] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
> [    1.148627] ACPI: Power Button [PWRF]
> [    1.151180] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
> [    1.151272] thermal LNXTHERM:00: registered as thermal_zone0
> [    1.151273] ACPI: Thermal Zone [TZ01] (57 C)
> [    1.151463] thermal LNXTHERM:01: registered as thermal_zone1
> [    1.151464] ACPI: Thermal Zone [TZ00] (49 C)
> [    1.151531] GHES: HEST is not enabled!
> [    1.151690] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
> [    1.152259] ACPI: Battery Slot [BAT0] (battery present)
> [    1.153536] Linux agpgart interface v0.103
> [    1.155927] loop: module loaded
> [    1.156081] libphy: Fixed MDIO Bus: probed
> [    1.156081] tun: Universal TUN/TAP device driver, 1.6
> [    1.156082] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
> [    1.156113] PPP generic driver version 2.4.2
> [    1.156150] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [    1.156152] ehci-pci: EHCI PCI platform driver
> [    1.156161] ehci-platform: EHCI generic platform driver
> [    1.156170] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [    1.156171] ohci-pci: OHCI PCI platform driver
> [    1.156178] ohci-platform: OHCI generic platform driver
> [    1.156183] uhci_hcd: USB Universal Host Controller Interface driver
> [    1.156352] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [    1.156364] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
> [    1.157452] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
> [    1.157456] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
> [    1.157541] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [    1.157542] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    1.157543] usb usb1: Product: xHCI Host Controller
> [    1.157544] usb usb1: Manufacturer: Linux 4.10.0-38-generic xhci-hcd
> [    1.157545] usb usb1: SerialNumber: 0000:00:14.0
> [    1.157642] hub 1-0:1.0: USB hub found
> [    1.157679] hub 1-0:1.0: 12 ports detected
> [    1.166465] xhci_hcd 0000:00:14.0: xHCI Host Controller
> [    1.166468] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
> [    1.166494] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
> [    1.166495] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [    1.166496] usb usb2: Product: xHCI Host Controller
> [    1.166497] usb usb2: Manufacturer: Linux 4.10.0-38-generic xhci-hcd
> [    1.166498] usb usb2: SerialNumber: 0000:00:14.0
> [    1.166634] hub 2-0:1.0: USB hub found
> [    1.166643] hub 2-0:1.0: 6 ports detected
> [    1.168784] usb: port power management may be unreliable
> [    1.171167] i8042: PNP: PS/2 Controller [PNP0303:KBD0] at 0x60,0x64 irq 1
> [    1.171168] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
> [    1.172322] serio: i8042 KBD port at 0x60,0x64 irq 1
> [    1.172500] mousedev: PS/2 mouse device common for all mice
> [    1.172820] rtc_cmos 00:03: RTC can wake from S4
> [    1.173221] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
> [    1.173303] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
> [    1.173307] i2c /dev entries driver
> [    1.173356] device-mapper: uevent: version 1.0.3
> [    1.173447] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
> [    1.173449] intel_pstate: Intel P-state driver initializing
> [    1.173773] intel_pstate: HWP enabled
> [    1.173925] ledtrig-cpu: registered to indicate activity on CPUs
> [    1.173926] EFI Variables Facility v0.08 2004-May-17
> [    1.183297] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
> [    1.235647] NET: Registered protocol family 10
> [    1.238768] Segment Routing with IPv6
> [    1.238782] NET: Registered protocol family 17
> [    1.238789] Key type dns_resolver registered
> [    1.239135] microcode: sig=0x406e3, pf=0x80, revision=0x9e
> [    1.239216] microcode: Microcode Update Driver: v2.2.
> [    1.241538] EFI: Loaded cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to '.builtin_trusted_keys'
> [    1.241554] EFI: Loaded cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to '.builtin_trusted_keys'
> [    1.243345] EFI: Loaded cert 'Wistron Secure Flash: 34988c042fea03ab4cf14666886666c5' linked to '.builtin_trusted_keys'
> [    1.243357] EFI: Loaded cert 'Acer Database: 84f00f5841571abd2cc11a8c26d5c9c8d2b6b0b5' linked to '.builtin_trusted_keys'
> [    1.243596] Couldn't get size: 0x800000000000000e
> [    1.243599] MODSIGN: Couldn't get UEFI MokListRT
> [    1.244575] EFI: Loaded cert 'Acer Database Forbidden: 9de028a2638669f109745d3e2a7ad5c9e64ed392' linked to '.system_blacklist_keyring'
> [    1.244602] registered taskstats version 1
> [    1.244608] Loading compiled-in X.509 certificates
> [    1.246644] Loaded X.509 cert 'Build time autogenerated kernel key: 0e953fd717aa51b8d9e0128dd1af1f8370b86949'
> [    1.246660] zswap: loaded using pool lzo/zbud
> [    1.256762] Key type big_key registered
> [    1.256764] Key type trusted registered
> [    1.258317] Key type encrypted registered
> [    1.258320] AppArmor: AppArmor sha1 policy hashing enabled
> [    1.258322] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
> [    1.258335] evm: HMAC attrs: 0x1
> [    1.259166]   Magic number: 2:543:539
> [    1.259180] tty ttyS19: hash matches
> [    1.259370] rtc_cmos 00:03: setting system clock to 2018-05-05 16:32:46 UTC (1525537966)
> [    1.259577] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [    1.259577] EDD information not available.
> [    1.260909] Freeing unused kernel memory: 2228K
> [    1.260910] Write protecting the kernel read-only data: 14336k
> [    1.261176] Freeing unused kernel memory: 1156K
> [    1.261589] Freeing unused kernel memory: 268K
> [    1.267413] x86/mm: Checked W+X mappings: passed, no W+X pages found.
> [    1.276245] random: systemd-udevd: uninitialized urandom read (16 bytes read)
> [    1.276300] random: systemd-udevd: uninitialized urandom read (16 bytes read)
> [    1.276307] random: systemd-udevd: uninitialized urandom read (16 bytes read)
> [    1.276317] random: systemd-udevd: uninitialized urandom read (16 bytes read)
> [    1.276715] random: udevadm: uninitialized urandom read (16 bytes read)
> [    1.276727] random: udevadm: uninitialized urandom read (16 bytes read)
> [    1.280494] random: systemd-udevd: uninitialized urandom read (16 bytes read)
> [    1.280507] random: systemd-udevd: uninitialized urandom read (16 bytes read)
> [    1.280511] random: systemd-udevd: uninitialized urandom read (16 bytes read)
> [    1.280706] random: systemd-udevd: uninitialized urandom read (16 bytes read)
> [    1.306390] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
> [    1.312219] wmi: Mapper loaded
> [    1.321968] hidraw: raw HID events driver (C) Jiri Kosina
> [    1.327191] ahci 0000:00:17.0: version 3.0
> [    1.327429] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> [    1.327435] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
> [    1.327453] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
> [    1.327455] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
> [    1.327948] scsi host0: ahci
> [    1.328725] [drm] Initialized
> [    1.329677] scsi host1: ahci
> [    1.334292] scsi host2: ahci
> [    1.334343] ata1: SATA max UDMA/133 abar m2048@0xb132e000 port 0xb132e100 irq 123
> [    1.334343] ata2: DUMMY
> [    1.334344] ata3: DUMMY
> [    1.338841] r8169 0000:02:00.0 eth0: RTL8168h/8111h at 0xffffb08040cb9000, 30:65:ec:8c:79:c6, XID 14100800 IRQ 124
> [    1.338842] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
> [    1.357245] r8169 0000:02:00.0 enp2s0: renamed from eth0
> [    1.357530] [drm] Memory usable by graphics device = 4096M
> [    1.357532] checking generic (a0000000 7e9000) vs hw (a0000000 10000000)
> [    1.357532] fb: switching to inteldrmfb from EFI VGA
> [    1.357550] Console: switching to colour dummy device 80x25
> [    1.357637] [drm] Replacing VGA console driver
> [    1.363524] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [    1.363525] [drm] Driver supports precise vblank timestamp query.
> [    1.372636] [drm] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)
> [    1.373647] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
> [    1.380651] [drm] GuC firmware load skipped
> [    1.466213] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
> [    1.466460] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
> [    1.466570] [drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
> [    1.498065] usb 1-4: new full-speed USB device number 2 using xhci_hcd
> [    1.549173] fbcon: inteldrmfb (fb0) is primary device
> [    1.549260] Console: switching to colour frame buffer device 240x67
> [    1.549283] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> [    1.641703] usb 1-4: New USB device found, idVendor=085c, idProduct=0500
> [    1.641705] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [    1.641706] usb 1-4: Product: Datacolor Spyder5
> [    1.641706] usb 1-4: Manufacturer: Datacolor
> [    1.649580] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [    1.654446] ata1.00: ATA-9: KINGSTON RBU-SNS8152S3256GF, SAFM01.6, max UDMA/133
> [    1.654447] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
> [    1.655079] ata1.00: configured for UDMA/133
> [    1.655432] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON RBU-SNS 01.6 PQ: 0 ANSI: 5
> [    1.690285] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [    1.690409] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
> [    1.690437] sd 0:0:0:0: [sda] Write Protect is off
> [    1.690439] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [    1.690540] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [    1.692866]  sda: sda1 sda2 sda3 sda4
> [    1.693480] sd 0:0:0:0: [sda] Attached SCSI disk
> [    1.761774] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
> [    1.945694] raid6: sse2x1   gen()  7931 MB/s
> [    1.993688] raid6: sse2x1   xor()  4857 MB/s
> [    2.041692] raid6: sse2x2   gen()  9491 MB/s
> [    2.089691] raid6: sse2x2   xor()  6557 MB/s
> [    2.137694] raid6: sse2x4   gen() 10714 MB/s
> [    2.185664] raid6: sse2x4   xor()  7078 MB/s
> [    2.233667] raid6: avx2x1   gen() 14337 MB/s
> [    2.281664] raid6: avx2x1   xor() 10233 MB/s
> [    2.329663] raid6: avx2x2   gen() 16775 MB/s
> [    2.377669] raid6: avx2x2   xor() 11678 MB/s
> [    2.425664] raid6: avx2x4   gen() 19014 MB/s
> [    2.473668] raid6: avx2x4   xor() 13934 MB/s
> [    2.473668] raid6: using algorithm avx2x4 gen() 19014 MB/s
> [    2.473669] raid6: .... xor() 13934 MB/s, rmw enabled
> [    2.473669] raid6: using avx2x2 recovery algorithm
> [    2.473679] clocksource: Switched to clocksource tsc
> [    2.474592] xor: automatically using best checksumming function   avx       
> [    2.485180] Btrfs loaded, crc32c=crc32c-intel
> [    2.493463] random: fast init done
> [    2.558536] usb 2-1: New USB device found, idVendor=0951, idProduct=1666
> [    2.558544] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [    2.558550] usb 2-1: Product: DataTraveler 3.0
> [    2.558554] usb 2-1: Manufacturer: Kingston
> [    2.558558] usb 2-1: SerialNumber: 08606E6D40B6BF701704BE9A
> [    2.562870] usb-storage 2-1:1.0: USB Mass Storage device detected
> [    2.562987] scsi host3: usb-storage 2-1:1.0
> [    2.563040] usbcore: registered new interface driver usb-storage
> [    2.563947] usbcore: registered new interface driver uas
> [    2.673862] usb 1-5: new full-speed USB device number 3 using xhci_hcd
> [    2.798505] [drm] RC6 on
> [    2.815319] usb 1-5: New USB device found, idVendor=0489, idProduct=e09f
> [    2.815345] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [    2.933860] usb 1-7: new high-speed USB device number 4 using xhci_hcd
> [    3.135156] usb 1-7: New USB device found, idVendor=04f2, idProduct=b51f
> [    3.135157] usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
> [    3.135158] usb 1-7: Product: HD WebCam
> [    3.135159] usb 1-7: Manufacturer: Chicony Electronics Co.,Ltd.
> [    3.135160] usb 1-7: SerialNumber: 200901010001
> [    3.258107] usb 1-8: new high-speed USB device number 5 using xhci_hcd
> [    3.398559] usb 1-8: New USB device found, idVendor=0bda, idProduct=0129
> [    3.398560] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [    3.398561] usb 1-8: Product: USB2.0-CRW
> [    3.398562] usb 1-8: Manufacturer: Generic
> [    3.398562] usb 1-8: SerialNumber: 20100201396000000
> [    3.401966] usbcore: registered new interface driver rtsx_usb
> [    3.568899] scsi 3:0:0:0: Direct-Access     Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6
> [    3.569295] sd 3:0:0:0: Attached scsi generic sg1 type 0
> [    3.570330] sd 3:0:0:0: [sdb] 61457664 512-byte logical blocks: (31.5 GB/29.3 GiB)
> [    3.570910] sd 3:0:0:0: [sdb] Write Protect is off
> [    3.570912] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
> [    3.571463] sd 3:0:0:0: [sdb] No Caching mode page found
> [    3.571466] sd 3:0:0:0: [sdb] Assuming drive cache: write through
> [    3.582195]  sdb: sdb1 sdb2 sdb3
> [    3.583958] sd 3:0:0:0: [sdb] Attached SCSI removable disk
> [    4.097978] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
> [    4.414971] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
> [    4.415069] systemd[1]: Detected architecture x86-64.
> [    4.415670] systemd[1]: Set hostname to <beta-Aspire-V3-372>.
> [    4.669955] systemd[1]: Listening on udev Control Socket.
> [    4.670018] systemd[1]: Listening on Journal Socket.
> [    4.670039] systemd[1]: Listening on LVM2 metadata daemon socket.
> [    4.670066] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
> [    4.670130] systemd[1]: Created slice System Slice.
> [    4.670397] systemd[1]: Starting Uncomplicated firewall...
> [    4.670750] systemd[1]: Starting Create list of required static device nodes for the current kernel...
> [    4.793969] lp: driver loaded but no devices found
> [    4.852309] ppdev: user-space parallel port driver
> [    5.162551] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro
> [    5.190639] systemd-journald[377]: Received request to flush runtime journal from PID 1
> [    5.319657] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [    5.332417] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
> [    5.339601] idma64 idma64.0: Found Intel integrated DMA 64-bit
> [    5.340041] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
> [    5.340287] idma64 idma64.1: Found Intel integrated DMA 64-bit
> [    5.340612] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
> [    5.340655] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
> [    5.356778] random: crng init done
> [    5.482772] media: Linux media interface: v0.10
> [    5.488020] Linux video capture interface: v2.00
> [    5.496853] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b51f)
> [    5.501142] uvcvideo 1-7:1.0: Entity type for entity Extension 4 was not initialized!
> [    5.501144] uvcvideo 1-7:1.0: Entity type for entity Processing 2 was not initialized!
> [    5.501145] uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized!
> [    5.501197] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input5
> [    5.501239] usbcore: registered new interface driver uvcvideo
> [    5.501239] USB Video Class driver (1.1.1)
> [    5.585875] Adding 4095996k swap on /dev/sdb2.  Priority:-1 extents:1 across:4095996k FS
> [    5.645609] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
> [    5.645610] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
> [    5.645610] RAPL PMU: hw unit of domain package 2^-14 Joules
> [    5.645611] RAPL PMU: hw unit of domain dram 2^-14 Joules
> [    5.645611] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
> [    5.645611] RAPL PMU: hw unit of domain psys 2^-14 Joules
> [    5.660199] AVX2 version of gcm_enc/dec engaged.
> [    5.660200] AES CTR mode by8 optimization enabled
> [    5.689943] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
> [    5.742835] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
> [    5.742838] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [    5.742839] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
> [    5.742840] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
> [    5.742841] snd_hda_codec_realtek hdaudioC0D0:    inputs:
> [    5.742842] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x12
> [    5.758617] Bluetooth: Core ver 2.22
> [    5.758630] NET: Registered protocol family 31
> [    5.758630] Bluetooth: HCI device and connection manager initialized
> [    5.758633] Bluetooth: HCI socket layer initialized
> [    5.758635] Bluetooth: L2CAP socket layer initialized
> [    5.758649] Bluetooth: SCO socket layer initialized
> [    5.761997] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
> [    5.762057] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
> [    5.762111] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
> [    5.762165] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
> [    5.764532] usbcore: registered new interface driver btusb
> [    5.773763] intel_rapl: Found RAPL domain package
> [    5.773764] intel_rapl: Found RAPL domain core
> [    5.773764] intel_rapl: Found RAPL domain uncore
> [    5.773765] intel_rapl: Found RAPL domain dram
> [    5.842466] ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
> [    5.879106] acer_wmi: Acer Laptop ACPI-WMI Extras
> [    5.879132] acer_wmi: Function bitmap for Communication Button: 0x801
> [    5.887806] acer_wmi: Enabling Launch Manager failed: 0xe4 - 0x0
> [    5.887855] input: Acer WMI hotkeys as /devices/virtual/input/input10
> [    5.888617] input: Acer BMA150 accelerometer as /devices/virtual/input/input11
> [    6.130307] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:03:00.0.bin failed with error -2
> [    6.130315] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2
> [    6.133426] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2
> [    6.133427] ath10k_pci 0000:03:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2
> [    6.140040] ath10k_pci 0000:03:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 105b:e09d
> [    6.140042] ath10k_pci 0000:03:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
> [    6.140528] ath10k_pci 0000:03:00.0: firmware ver WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5
> [    6.172303] hid-multitouch 0018:04F3:3010.0001: Ignoring the extra HID_DG_INPUTMODE
> [    6.172354] input: ELAN0501:00 04F3:3010 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-5/i2c-ELAN0501:00/0018:04F3:3010.0001/input/input14
> [    6.172452] hid-multitouch 0018:04F3:3010.0001: input,hidraw0: I2C HID v1.00 Mouse [ELAN0501:00 04F3:3010] on i2c-ELAN0501:00
> [    6.220425] ath10k_pci 0000:03:00.0: board_file api 2 bmi_id N/A crc32 6fc88fe7
> [    6.250115] audit: type=1400 audit(1525537971.486:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=857 comm="apparmor_parser"
> [    6.250931] audit: type=1400 audit(1525537971.486:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=855 comm="apparmor_parser"
> [    6.250933] audit: type=1400 audit(1525537971.486:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=855 comm="apparmor_parser"
> [    6.250934] audit: type=1400 audit(1525537971.486:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=855 comm="apparmor_parser"
> [    6.250935] audit: type=1400 audit(1525537971.486:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=855 comm="apparmor_parser"
> [    6.251800] audit: type=1400 audit(1525537971.486:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=859 comm="apparmor_parser"
> [    6.253772] audit: type=1400 audit(1525537971.490:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=858 comm="apparmor_parser"
> [    6.253773] audit: type=1400 audit(1525537971.490:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=858 comm="apparmor_parser"
> [    6.253775] audit: type=1400 audit(1525537971.490:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=858 comm="apparmor_parser"
> [    6.253990] audit: type=1400 audit(1525537971.490:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=862 comm="apparmor_parser"
> [    6.517495] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [    6.517496] Bluetooth: BNEP filters: protocol multicast
> [    6.517500] Bluetooth: BNEP socket layer initialized
> [    6.935951] cgroup: new mount options do not match the existing superblock, will be ignored
> [    7.317599] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
> [    7.372636] r8169 0000:02:00.0 enp2s0: link down
> [    7.372716] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
> [    8.339795] ath10k_pci 0000:03:00.0: htt-ver 3.26 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
> [    8.421194] ath: EEPROM regdomain: 0x6c
> [    8.421195] ath: EEPROM indicates we should expect a direct regpair map
> [    8.421197] ath: Country alpha2 being used: 00
> [    8.421197] ath: Regpair used: 0x6c
> [    8.426064] ath10k_pci 0000:03:00.0 wlp3s0: renamed from wlan0
> [    8.453281] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
> [   10.761031] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
> [   12.222758] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
> [   34.174740] Bluetooth: RFCOMM TTY layer initialized
> [   34.174746] Bluetooth: RFCOMM socket layer initialized
> [   34.174750] Bluetooth: RFCOMM ver 1.11
> [   36.294548] wlp3s0: authenticate with c4:ea:1d:c5:7f:f3
> [   36.336742] wlp3s0: send auth to c4:ea:1d:c5:7f:f3 (try 1/3)
> [   36.441792] wlp3s0: send auth to c4:ea:1d:c5:7f:f3 (try 2/3)
> [   36.443460] wlp3s0: authenticated
> [   36.445767] wlp3s0: associate with c4:ea:1d:c5:7f:f3 (try 1/3)
> [   36.449219] wlp3s0: RX AssocResp from c4:ea:1d:c5:7f:f3 (capab=0x411 status=0 aid=2)
> [   36.452152] wlp3s0: associated
> [   36.452198] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
> [   55.943763] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
> [   55.943767] Bluetooth: HIDP socket layer initialized

I guess the important things are at the end. I deleted some lines at the beginning because it was too long.


(http://4232.cf) #6

Your synchronised the device and gave permission to the bluetooth in blueman (?)


#7

Yes. I have even compiled and installed the newest wacom driver. No change


(http://4232.cf) #8

And by usb works?


#9

Yes


#10

Meanwhile, the reason for the problem is known: the newest wacom driver for linux does also support bluetooth for this device. However, on my laptop it is not possible to use the latest driver on a regular installation. I compliled and installed the driver, but the new custom kernel is blocked by secure boot. And without secure boot, I cannot boot my system. I can only boot live systems on pendrives without secure boot. So far I have tried ubuntu and mint. Not tried manjaro yet. In theory it is possible to sign custom kernel modules so they are not blocked by secure boot, but that task is way above my linux level.


(Mica) #11

You should be able to disable secure boot in the EFI/Bios settings screen of your computer.


#12

Yes, that is possible, but dual boot only works with secure boot on my laptop. I cannot erase Windows, I need Windows for Photoline and Affinity and stacking and panoramas etc etc. If I want to boot linux, I need to configure my secure boot and select ubuntu’s trusted EFI-file on the EFI-partition. Thats the only way I can boot a regular linux. I did deactivate secure boot for the live systems. But I can only boot live systems (form pendrives) and Windows without secure boot
Actually I do not even know if I could boot linux without secure boot if it were the only OS
I mean I could in theory switch my UEFI to BIOS-mode but then my touchpad would not work properly. And maybe I would have to reinstall Windows in BIOS mode.
Anyway, secure boot is closely linked to Microsoft. In a way, it actually made having Windows and linux at the same time easier, because I can still access my Windows recovery partition without problems. But in general, it makes things more complicated.


(Mica) #13

https://wiki.ubuntu.com/UEFI/SecureBoot/Signing


#14

Have you don this before?
From what I understand, this is not an easy task


(Mica) #15

I haven’t, I don’t dual boot and I disable secure boot.


#16

As I said, I do not know whether linux could boot without secure boot if it were the only OS. I would not be surprized if not
Basically it is the same thing as the driver signature enforcement under Windows, but that is easy to switch off


(Mica) #17

My computers all have secure boot off and Linux runs fine.


(http://4232.cf) #18

UEFI Only exists so that gnu/linux do not work


#19

I have had both Linux and Windows on the same computer for many years. Two years ago I bought a new laptop and I could not make LInux boot. So I used only Windows. A few weeks ago I googled and found out how it is possible to make Linux boot with active secure boot.
I would try that signing thing but I cannot risk screwing up my laptop or Windows.


#20

I encountered secure boot for the first time a few years ago when I bought a new laptop for my mother. Apparently, the method to turn it off is different for different systems. I couldn’t find a way to do it at the time. My workaround was to install Windows first and then make Linux the primary OS. What a bummer.