@neo22s I have been working (almost) exclusively on Linux for about 20 years now
Anyway, it seems you have a broken (or maybe too old) exiftool installation. I need to better trap this error in the code, but in the meantime you can try the following:
@neo22s thanks for the post! I’ve added a link to it in the docs section of the home page. One minor point though: ART is a derivative of RawTherapee, not a clone. I say this so that people looking for RT+Canon CR3 won’t get disappointed when they see ART instead…
I have a strange problem with exiftool.
First if I use the deb package of @Dariusz_Duma it works perfectly, the path to my exiftool program is OK.
Then I use the appimage from @Carmelo_DrRaw (1.1-45) and all is OK I detect data from Raw CR3 files.
If I use my compilation (1.1-45) i only get a partial information
Where could be the problem ?
Thanks for your suggestion
I must say that it already works in previous versions.
Serge
It woks perfectly for me.
What I noticed recently are new messages during the compilation. See joint fileComp.txt (2.2 KB)
Could it be related to that ?
Thanks
Serge Moreau
I have the same problem as Serge.
My linux distro uses exiv2 0.27.2 compiled with the following flags :
cmake
-DCMAKE_C_FLAGS=“-O2 -fPIC”
-DCMAKE_CXX_FLAGS=“-O2 -fPIC”
-DCMAKE_INSTALL_PREFIX=/usr
-DLIB_SUFFIX=“64”
-DMAN_INSTALL_DIR=/usr/man
-DBUILD_SHARED_LIBS=ON
-DEXIV2_ENABLE_CURL=ON
-DEXIV2_ENABLE_VIDEO=ON
-DEXIV2_ENABLE_WEBREADY==ON
-DEXIV2_ENABLE_XMP=ON
-DEXIV2_BUILD_SAMPLES=OFF
-DEXIV2_ENABLE_NLS=ON
…
Can you tell me if these flags are correct or do I have to change them ?
I have the same problem here.
Before on Ubuntu 18.04, I had put the path of a recent exiftool in preferences and everything was fine.
On Ubuntu 20.04 with Exiv2 from Ubuntu repositories (version 0.27.2), no exif for CR3, although exiftool is correctly indicated in the preferences.
Reproducible with Art 1.2 and Art 1.3 in compiled version.
With the AppImage, the exifs are present. But impossible to have access to the correction of objectives with the Appimage version.
So I use AdobeDngConverter to have the Exifs with the compiled version.
Ok, thanks for the info. I guess the problem is always the same: exiv2 is somehow miscompiled, so that exceptions do not get propagated. Would it be possible to try using a self-compiled exiv2 and see if the problem persists?
In the meantime I’ll try to get a 20.04 VM and see what is going on…
With the AppImage, the exifs are present. But impossible to have access to the correction of objectives with the Appimage version.
Can you send me your options file? Also, ping @Carmelo_DrRaw.
Yes, exiftool 11.98 is installed and the full path to it was set in the preferences.
Using exiftool on the command line gives all the information from a .CR3 file.
Good! In the meantime, considering that some other people might be affected by this, I’ve implemented a “hack” that should make ART work also with the stock exiv2 lib of 20.04.